Using PS3 Controller on Pc(32-bit): This is how you use a PS3 controller in a 32-bit computer (too see if your computer is 32-bit or 64-bit right click the computer button then click properties). Connect the controller the driver will start installing leave it like that installing, open the Ds3 tool file it wont say that the controller is. Connect your PlayStation 3 controller to your PC via USB, and Windows should begin installing an initial set of drivers. If you’re running Windows 10, the Xbox driver should install. Oct 30, 2017  Hi, I have been going crazy, Windows 10 does not recognize my DS3 controller as a Playstation 3 controller, it shows 'Unknown USB Device (Device Descriptor Request Failed)' every time I plugg it in, so I can't install any of the softwares that make PS3 controllers work like a x360 controller. Hi, Update chipset driver. Then, make sure.

Xbox 360 Controller Driver (A PS3 controller driver for Windows 7 and older). Unplug your controller from the cable and it should connect your PS3 controller to your Windows 10 PC via Bluetooth. And obviously, you’re not alone. There are a lot of competitive gamers out there who play better on a console controller than a traditional. Xbox 360 Controller Driver (A PS3 controller driver for Windows 7 and older). Unplug your controller from the cable and it should connect your PS3 controller to your Windows 10 PC via Bluetooth. And obviously, you’re not alone. There are a lot of competitive gamers out there who play better on a console controller than a traditional. A MotioninJoy driver configuration tool for PS3 controllers:. Better DS3 is an offline MotioninJoy driver configuration tool. You can configure almost all the functions of the controller including LED assignment, vibration strength, Keyboard/Mouse mappings, and PCSX2 pressure sensitivity. Better DS3 Offline MotioninJoy driver configuration tool. Flexible, featureful, inconspicous, and best of all, no calling home.

Five years into a new console generation, the PlayStation 3 is all but extinct. Gamers have few reasons to break out their PS3 (unless they need an oversized paperweight). Still, if you’ve got a game-worthy PC, those old DualShock 3 controllers can be put to good use. With a few minutes and a Mini USB cable — which you can get for around five bucks on Amazon — you can sync your PS3 Controller with your PC. If that interests you, we’ve thrown together the guide below, so you can ditch the mouse and keyboard for something a bit more traditional. Here’s how to connect a PS3 controller to your PC.

Related content

Step 1: Update Drivers and .NET Framework

1. Connect your PlayStation 3 controller to your PC via USB, and Windows should begin installing an initial set of drivers.
2. Check your currently installed drivers by opening Command Prompt and typing in “driverquery,” and hitting Enter.
3. Make sure you’ve got the official Xbox 360 PC driver, .NET Framework 4.0, and Visual C++ (2010 or later should work). If you’re running Windows 10, the Xbox driver should install automatically, but you may need to download it manually if you’re running an older operating system.

Step 2: Download and Install SCP Driver Package

1. Head to the official SCP Toolkit download thread and click the green link to download the latest stable release. If you’re using an older version of Windows, you will need a tool like 7-Zip to extract the files; Windows 10 has a native decompression tool.
2. Extract and launch the executable file — “ScToolkit_Setup.exe” — as an administrator to install the software.
3. Once installed, you’ll be prompted to open the program, which will actually install additional drivers (it sounds more complicated than it is). If you don’t see this prompt, search for “Scp” and select ScpToolkit Driver Installer.
4. Go ahead and run the installer, and a new window will open. Be sure all the boxes are checked, including Force driver installation.
5. From the Choose DualShock 3 drop-down menu, find and select your DualShock 3 controller. If you also plan to use either a DualShock 4 or a Bluetooth dongle to enable wireless play, select those as well.
6. Click Install. All the necessary files will install and be automatically configured. Once complete, your DualShock 3 will now be plug-and-play, meaning you can plug it in at any time and it should work automatically.

Note: As of January 2018, ScpToolkit is no longer in active development. Future Windows updates could make it an ineffective solution. As of now, though, it’s still a viable option.

Something to keep in mind: Since you’re technically using the Xbox 360 drivers to interact with the PS3 controller, games will likely display an Xbox control scheme. So when a game wants you to “press X,” you’ll want to hit the Square button instead.

Ds3 Drivers Windows 10

Step 3: Creating a Profile

At this point, your DualShock 3 is ready to go. However, if you’re so inclined, you can fine-tune your controller through various applications included with the ScpToolkit.

1. With the Profile manager, you can create custom button mappings that you can then swap between on the fly. You can also create mapping for your keyboard and mouse as well.
2. The Settings Manager will even allow you to fine-tune your thumbstick sensitivity, rumble, controller latency, and LED display, among a lot of other advanced settings.

Troubleshooting for Windows 10

Windows 10 can be picky with controllers. Microsoft’s operating system is, unsurprisingly, designed to work with Xbox One accessories and the Xbox Live ecosystem: It isn’t naturally suited for a Sony device, especially an outdated one. While the ScpToolkit circumvents most of the issues users may face when using the DualShock 3 on their PC, there may be errors during the installation process. Thankfully, there is a workaround to enable driver installation, should the process not go smoothly. It may be wise, however, to back up important files before proceeding, even if the procedure isn’t necessarily dangerous. You will be changing Windows startup settings, after all.

1. Begin by pressing the Start button, or the Windows key.
2. Go to Settings.
3. Click on Update and security.
4. Select Recovery from the list on the left.
5. Click Advanced restart.
6. Now, wait. Your system will restart and boot in a mode that will allow you to alter your firmware and startup settings, thus allowing you to bypass the driver signature enforcement.
7. Select Troubleshoot from the resulting list of options.
8. Click Advanced settings, then Startup settings. This will initiate another restart.
9. After your system boots again, you will have another set of options to choose from. Find Disable driver signature enforcement, then press the F7 Key to reboot your PC one last time.
10. When your PC finishes rebooting, follow the procedures outlined above to reinstall and configure Scptoolkit.

Hi,

Welcome to Microsoft Community.

1. Have you try to connect to a different USB port?

2. What is the make and model of the PS3 controller? Does it comes along with PS3 device?

3. Have you tried with other versions of windows?

This issue normally occurs when the controller is not compatible with the operating system or unsupported.

You may have to manually uninstall and reinstall the driver. Follow the steps provided.

Steps to uninstall and reinstall the driver:

1. Click on start button.
2. In the search box type devmgmt.msc and then press enter.
3. Select the controller device and right click on it.
4. Now select properties.
5. In the properties window, under Driver tab, click on Uninstall button.
6. After the uninstalling the drivers restart the computer. This should automatically install proper drivers for it.

Ps3 Controller Driver Windows 10 Better Ds3 Games

You may also download and install the latest driver for it from manufacturer’s website.

Keep us posted if you face any issues on windows in future. We will be glad to help you.